Designation according to DIN 28091-2: FA-AM1-O
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its aﬃliates.
Maximum Working Conditions
Non-standard thicknesses, graphiting of sheet surfaces, and reinforcement with metallic mesh available upon request.
Metallic mesh reinforcement increases the maximum working pressure by 2 MPa (other physical and chemical properties are also changed).
Physical and chemical properties
(Values as detailed in table refer to 2.0 mm thick gasket sheets)
It is not recommended that maximum tempera-ture and pressure are applied simultaneously.Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
There is no requirement for trials.
Trials should be run if the application involves steam.