Designation according to DIN 28091-2: FA-AM1-O
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its aﬃliates.
Maximum Working Conditions
Non-standard thicknesses, graphiting of sheet surfaces, and reinforcement with metallic mesh available upon request.
Physical and chemical properties
(Values as detailed in table refer to 2.0 mm thick gasket sheets)
It is not recommended that maximum tempera-ture and pressure are applied simultaneously.Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
The below tests were run according to EN 13555, the most up-to-date norm in this domain. The results conﬁ rm
There is no requirement for trials.
Trials should be run if the application involves steam.
Test Results of Gambit AF‒200 UNIVERSAL Published on Gasketdata.org
The below tests were run according to EN 13555, the most up-to-date norm in this domain. The results conﬁrm the quality of our products and assist the design of ﬂ anges according to norm EN 1591-1+A1:2009/AC:2011.
The results have been approved by Center of Sealing Technologies (CST) at Münster University of Applied Sciences (MUAS) and published on www.gasketdata.org together with the datasheets of the worldʼs leading manufacturers of sealing materials.
CST is an independent laboratory focused on the research and development in the ﬁ eld of sealing materials in order to assist both the producers and the users.