Designation according to DIN 28091-2: FA-AM1-ST
Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its aﬃ
Maximum Working Conditions
Non-standard thicknesses and graphiting of sheet surfaces available upon request.
Physical and chemical properties
(Values as detailed in table refer to 2.0 mm thick gasket sheets)
It is not recommended that maximum tempera-ture and pressure are applied simultaneously.Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
There is no requirement for trials.
Trials should be run if the application involves steam.